V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2
V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2

V53 universal TV lcd control board 10-42inch lvds driver board TV VGA AV HDMI USB DS.V53RL.BK full kit for LTM190M2

Regular price
$23.75
Sale price
$23.75

 

This kit support the panel in following condition:
Interface Type:LVDS (2 ch, 8-bit) , 30 pins , Connector
 
Light Source:4 pcs CCFL , 50K hours , Without Driver
 
For example:
LTM190M2-L31   HT190WG1-100      LM220WE1-TLA1   LM220WE1-TLB3    LM220WE1-TLD4  LM220WE1-TLE1  M190A1-L0A  M240HW01 V0
 M170EG02 V3   LTM190EX-L01      G170EG01 V0    HT170EX1-100      HSD190ME12-A00   LM190WX1-TLA1   M236MWF1 R0   CLAA170EA07Q
LTM230HT01   HT170E01-101  M201EW02 V8    M220Z1-L03   QD17EL07 Rev.11  M240HW01 V2  HT17E11-300   MT220WW01 V.1    ect.

General Description:

1.DS.V53RL.BKis an analog TV control board, which is suitable for Asia-pacific and middle-east market.
2.DS.V53RL.BK’s USB slot can be used for updating software and playing multimedia, such as MP3 and
JPEG.
3.DS.V53RL.BK’sHDMI support for the scheme is 1.3/1.4,HDCP1.2 compliant.
 
Configuration & General Precautions
1.Protect the board from static electricity to avoid damage to the IC.
2.Keep the board away from conductor when it is working.
3.Don’t press, distort or disassemble the board.
4.Clean the board with soft dry cloth when it’s dirty.
5.Don’t switch on the power supply before panel is correctly connected.
6.The brightness of panel is influenced greatly by temperature, you should measure it after power on 10~30 minutes.
7.Keep the board surface clean. Check the appearance of the board if there has any defective parts, such as damaged,
weighty nick, etc.
 
Features
CHIP:TSUMV53RUUL
OSD LANGUAGE:English, Chinese,russian,Spanish, Portuguese, Turkish, French, German,ect.
Panel Type:TFT LCD With LED Backlight
Panel Interface:1ch/2ch 6bit/8bit  LVDS Interface
Max Resolution:1920x1080
TV Receiving Range:48.25MHz ~ 863.25MHz
Video System:PAL,SECAM, NTSC
Sound System:BG,DK,I,L,M,N  NICAM/A2
Max Storage Channels:199CH
PC-RGB Format:Up to 1920×1080@60Hz
CVBS Video System:PAL/NTSC/SECAM
CVBS Video Level:1.0Vp-p±10%
HDMI:480i, 480p, , 576i, 576p, 720I, 720p, 1080i, 1080p
AUDIO INPUT:
PC Audio Earphone Input Level 0.2~2.0VRMS
CVBS Audio/Component Audio:L/R RCA Input 0.2~2.0VRMS
VIDEO OUTPUT:
CVBS Video System:PAL/NTSC/SECAM
Video level:1.0Vp-p±10%
SPEAKER Frequency Response:100Hz~15K Hz @±3dB(1KHz 0dB Reference Signal)
speaker Max Output Power:2×3W(4Ω) THD+N<10%@1KHz
POWER DCInputvoltage :12VDC±0.6V
power to To Panel :3.3V、5V、12V (there can be selected by Jumper Cap. The factory defaults to 5V)
power Management:Standby Power Consumption < 0.3W(Board Only)
power ADJ:0V ≤ ADJ ≤ 5.0V
power BL ON:Standby mode :<0.5V On mode:>2.5V
KEY FUNCTION:TV/AV,MENU,VOL+,VOL-, CH+,CH-,POWER
Note:
1.When 3.3V panel Irush≥1000mA,Inormal≥600mA,please contact wit DX engineers to confirm 3.3V panel power
supply component selection.
2.Max current of USB:500mA. The board is not suitable for all operating current less than 500mA
 
 
Use step:
 
Download firmware :
 https://drive.google.com/file/d/1whubJqnPoguDMGenGrjZNFT7P398cLUk/view?usp=drivesdk
 
Program update method:
1. Prepare a USB flash drive and download the program we provide(leave email in order page we will sent program via email). Find the required firmware from the file (select firmware according your screen resolution)and copy L53BK1.bin  to the USB flash drive.
2.set the voltage on board(it is according your screen input voltage :3.3v/5v/12v)
3.plug U disc to the board, and plug 7 key board,then plug power adapter,power on. then you can see the light on key board will be flashing. it is mean the board is installing program. (at this moment , don't let power off!)
4. after few minutes, the led will be stop flashing, mean finished. then power off, Pull out the USB , then plug lvds cable and inverter. power on .then screen show blue and you can connect to HDMI or VGA signal.
Note:
voltage should be set correctly(3.3v/5v/12v);
The power requirement of 12V4A;
don't let power off when installing program;
The screen line not to reverse and dislocation;
select lvds cable and inverter should according your panel specs.if you can't select, pls offer panel number to us, we will help you.
 
 
Common settings:
1. Switch computer / TV / USB
Press the remote control "input" to switch
2. Menu adjusts brightness
In the menu "Image Mode" is set to "User Mode"
3. The picture is not displayed correctly
Press “Menu” with the remote control, then press “1147” to enter the common settings and adjust “lvds map”
4.USB playback MKV format movie silent
Since the MKV format is mostly DTS audio tracks, it will cause the USB playback to be silent, and the software needs to convert the DTS into AC3 audio tracks.
5.Set boot logo
Use the U disk to play the picture that needs to set the LOGO, find the "catch map" at the bottom left of the screen and save it.
 
v53-4 v53-7 v53-8
4-1 42-1 43-1 -2 3 IMG_6402 IMG_6403 IMG_6404 IMG_6406 IMG_6407 IMG_6408 IMG_6409 IMG_6410 IMG_6411 IMG_6412
 
 

 

Common settings:
1. Switch computer / TV / USB
Press the remote control "input" to switch
2. Menu adjusts brightness
In the menu "Image Mode" is set to "User Mode"
3. The picture is not displayed correctly
Press “Menu” with the remote control, then press “1147” to enter the common settings and adjust “lvds map”
4.USB playback MKV format movie silent
Since the MKV format is mostly DTS audio tracks, it will cause the USB playback to be silent, and the software needs to convert the DTS into AC3 audio tracks.
5.Set boot logo
Use the U disk to play the picture that needs to set the LOGO, find the "catch map" at the bottom left of the screen and save it.